High-pressure gas produced by the compressor is used by the pneumatic punching machine from the Pneumatic Euro Slot Punch Supplier to provide pressurized gas to the solenoid valve via the pipeline. To accomplish the goal of punching, the solenoid valve's operation is controlled by the foot switch, which also controls the cylinder's functioning and returns.
There is no energy loss from the motor idling because the compressed air may be kept in the storage tank and used whenever it is needed. The structure of this machine is made simpler by using the cylinder as the working component and the solenoid valve as the control element.
This machine from any Pneumatic Euro Slot Punch Manufacturer has a low malfunction rate, high safety, simple upkeep, cheap running costs, and high manufacturing efficiency. The solenoid valve is controlled by a 220V power source, which makes operation easy and convenient.
- A pneumatic punching machine from a Pneumatic Euro Slot Punch Supplier is cleaner and more hygienic. Advanced photoelectric protection technology can significantly improve safety performance. Computerized counting with a programme can realise the unattended processing process, significantly increasing work efficiency and lowering production costs.
- Most of the work in the field of punching different metal and non-metal pipes and plates is done by electric punching machines.
- Electric punching machines not only cause significant noise pollution but also have expensive, difficult-to-maintain bodies, high maintenance costs, and high electricity consumption due to their intricate structural design. The operation poses a significant safety risk, has a high failure probability, and is difficult.
- The machine is more energy-efficient than an electric punching machine because of its straightforward construction, low production costs, and use of pneumatic technology, which allows one air compressor to power multiple pneumatic punching machines simultaneously.
- Reduce the loss in electricity consumption. Simple construction, low failure rate, solenoid valve control by foot switch, high level of safety, and increased production efficiency.
- Industry of machines and equipment: extending parts, metal stretching parts, equipment stamping parts, metal stamping components, car stamping parts, stamping metal components.
- Mobility supplies, vehicle safety equipment, protective gear, motorbike and automobile components, and communication items are all related to road traffic.
- Power cupboards, ATM teller device shells, air conditioner parts, printers, copier racks, and many kinds of precision sheet metal are examples of office supplies.
- Learn the names and functions of each component of the machine before beginning it.
- Check that the three air pressure gauges are in position before turning on the machine by first opening the air valve at the rear of the device.
- While the HL2 indication is on, turn on the primary power switch before turning on the engine start switch.
- When manufacturing, you must read and comprehend the drawings' technical specifications, particularly the sheet metal drawings' perspective orientation and opening algorithm. Ask the on-duty team leader or engineer right away if anything is unclear.
Before returning the moulds to the mould rack after use, we must determine whether they require maintenance or repair. Moulds that are out of the ordinary must not be repositioned on the mould rack. The label needs to be examined and placed where it belongs when the mould is reinstalled.